Los Angeles is surrounded by areas where dry vegetation, steep terrain, and seasonal fire conditions can increase wildfire risk. For property owners located within the City’s Very High Fire Hazard Severity Zone (VHFHSZ), maintaining defensible space and managing hazardous vegetation is an important year-round responsibility.
The Los Angeles Fire Department (LAFD) administers the City’s Brush Clearance Program and establishes requirements for grass, brush, trees, roof areas, and other vegetation that may contribute to wildfire spread.
If you own or manage property in an affected area, understanding these requirements can help you prepare for inspections, correct vegetation hazards, and maintain your property throughout the year.
What Is LAFD Brush Clearance?
LAFD brush clearance requirements are designed to reduce combustible vegetation around structures and other areas that may be vulnerable to wildfire.
The requirements generally apply to properties within the Very High Fire Hazard Severity Zone (VHFHSZ). According to LAFD, vegetation management must be maintained year-round, not just immediately before the annual inspection.
Property owners may need to manage:
- Dry grass and weeds
- Native brush
- Overgrown shrubs
- Tree branches and dead vegetation
- Vegetation near structures
- Vegetation near roads and driveways
- Combustible debris
- Leaves, needles and other material accumulating on roofs
Proper brush clearance can help create defensible space and reduce the amount of readily available fuel around a property.
How Much Brush Clearance Is Required in Los Angeles?
One of the most important LAFD requirements involves vegetation located within 200 feet of structures and within 10 feet of certain roadside surfaces or combustible fences.
LAFD’s published requirements state that grass in these areas should be maintained at approximately 3 inches in height. Native brush is also subject to reduction requirements, with specific exceptions for properly spaced individual native shrubs.
Because properties differ in terrain, vegetation, structures, and fire-hazard conditions, property owners should review the current LAFD requirements for their specific parcel rather than relying only on general clearance guidelines.
Tree Trimming Requirements
Trees can become an important source of combustible material when branches, dead vegetation, or foliage are allowed to accumulate close to the ground or structures.
For trees taller than 18 feet, LAFD’s published requirements call for lower branches to be trimmed so that foliage is not within 6 feet of the ground, while dead material should also be removed. For smaller trees and shrubs, lower branches may need to be removed to approximately one-third of the plant’s height.
Additional clearance requirements apply around chimneys and roofs.
Chimney Clearance
Trees should be trimmed so foliage is not closer than 10 feet from the outlet of a chimney.
Roof Clearance
Roof surfaces should be kept free of substantial accumulations of:
- Leaves
- Pine needles
- Twigs
- Dead vegetation
- Other combustible material
LAFD also specifies maintaining 5 feet of vertical clearance between roof surfaces and portions of overhanging trees.
What Happens to Cut Brush and Vegetation?
Removing vegetation is only part of the job. Cut vegetation and debris must also be handled appropriately.
LAFD states that cut vegetation must be removed in a legal manner. In some circumstances, vegetation can be machine processed, such as by chipping, and spread back onto the property subject to depth and location restrictions.
For example, LAFD’s published requirements state that processed material should not exceed:
- 3 inches in depth within 30 feet of structures
- 6 inches beyond 30 feet from structures
Spread material also should not be placed within 10 feet of a usable roadside.
Property owners should follow the current LAFD requirements and applicable local regulations when disposing of green waste and brush.
Brush Clearance Safety Requirements
Brush clearance work can itself create fire hazards when performed improperly.
Los Angeles has specific restrictions concerning equipment used for vegetation management in the VHFHSZ. LAFD states that metal cutting blades used for grass or brush clearance must be non-ferrous/non-sparking.
LAFD also states that brush-clearance operations should not be conducted on Red Flag Days and that people performing clearance should focus on the clearance operation rather than conducting other activities at the same time.
An appropriate fire extinguisher or pressurized garden hose should also be readily available during clearance operations, and a charged cell phone capable of dialing 911 should be accessible.
These requirements are especially important because sparks from vegetation-clearing equipment can ignite dry grass or brush.
Is LAFD Brush Clearance Required All Year?
Yes. Vegetation management is not simply a once-a-year task.
LAFD specifically describes vegetation management as a year-round responsibility. Depending on the property and vegetation growth, more than one clearing or maintenance operation may be necessary during the year.
Regular maintenance can make it easier to keep a property compliant rather than waiting until an inspection is approaching.
How Does the LAFD Brush Clearance Inspection Work?
LAFD conducts brush-clearance inspections on properties within the applicable brush zones.
According to LAFD’s inspection information, property owners should review their vegetation conditions and correct hazards before the applicable inspection period. LAFD inspectors then inspect properties and issue notices when violations are identified.
If a property does not comply, the owner may receive a Notice of Non-Compliance identifying the issues that need to be corrected.
If the property remains non-compliant after the required follow-up process, the City can arrange for a certified private contractor to perform the required clearance, with costs charged to the property owner.
2026 LAFD Brush Clearance Program
For 2026, LAFD announced that annual inspections are scheduled to begin May 1, 2026.
The City states that the 2026 brush-clearance inspection fee is $31 per parcel when applicable. Property owners can avoid the initial inspection fee by bringing their property into compliance by the stated deadline. Properties that fail the initial inspection can be subject to additional fees and enforcement procedures.
Because fees, deadlines, and enforcement procedures can change, property owners should always check the current LAFD information for the applicable year.
How Property Owners Can Prepare for Brush Clearance
Before the inspection period, property owners can review their property and look for common vegetation hazards.
A basic preparation checklist:
1. Inspect the property
Look for dry grass, weeds, overgrown brush, dead vegetation, and combustible debris.
2. Maintain vegetation around structures
Pay particular attention to vegetation within the required clearance areas surrounding buildings.
3. Trim trees
Remove dead branches and maintain appropriate separation between tree foliage, the ground, roofs, and other fire-vulnerable areas.
4. Clean the roof
Remove accumulated leaves, needles, twigs, and other combustible material.
5. Properly handle green waste
Dispose of or process cut vegetation according to applicable requirements.
6. Use appropriate equipment
Follow LAFD restrictions regarding metal blades and other equipment used for brush clearance.
7. Maintain the property throughout the year
Do not wait until an inspection notice arrives. Vegetation can grow back quickly, particularly after seasonal weather changes.
Need Professional Brush Clearance in Los Angeles?
Brush clearance can involve more than simply cutting weeds or removing a few shrubs. Properties in hillside and wildfire-prone areas may require careful vegetation management, debris removal, equipment selection, and attention to local fire-safety requirements.
Suncore LA provides professional property cleanup and site services for Los Angeles-area property owners and project managers. Our team can help with vegetation and site-clearing needs as part of a broader property preparation or cleanup project.
If your property needs brush removal, vegetation cleanup, demolition, grading, or related site work, contact Suncore LA to discuss your project requirements.
Keep Your Property Prepared
Maintaining defensible space is an ongoing responsibility for property owners in Los Angeles’ fire-prone areas. Staying ahead of vegetation growth and addressing hazardous brush before it becomes a larger problem can help keep your property better prepared for wildfire conditions.
For the most current requirements, property owners should consult the Los Angeles Fire Department Brush Clearance Program and the applicable Los Angeles Municipal Code provisions.
Suncore LA — Professional Site, Demolition & Property Cleanup Services in Los Angeles
Frequently Asked Questions
Does every Los Angeles property require brush clearance?
No. The specific LAFD Brush Clearance Program requirements apply to properties within applicable designated areas, including the Very High Fire Hazard Severity Zone. Property owners should verify whether their parcel is subject to the program.
How often should brush be cleared?
LAFD describes vegetation management as a year-round responsibility. Depending on the property, vegetation may need to be maintained more than once a year.
How far should vegetation be cleared from a building?
LAFD’s published requirements address hazardous vegetation within 200 feet of structures and additional clearance areas around roads and combustible fences. The exact treatment depends on the type and location of vegetation.
Can I clear the brush myself?
Property owners may perform their own clearance where appropriate, but they must follow applicable safety and clearance requirements. LAFD recommends hiring a professional when the owner cannot safely or correctly perform the work.
What happens if my property fails an LAFD inspection?
A property found to be non-compliant can receive a notice identifying the violations. If the required corrections are not completed, additional enforcement and contractor-related costs may apply.
Where can I check the official LAFD requirements?
Property owners can review the current requirements through the Los Angeles Fire Department’s Brush Clearance Program and FIMS system. Requirements and fees may be updated, so checking the official source is recommended before beginning clearance work.